BRUSH FENCING

BRUSH FENCING We Supply

Lasting anywhere from 20 to 30 years, Brush Fencing is durable enough for our harsh Australian climate and will not rot or crack. Not only will it reduce unwanted traffic noise but it will also act as a windbreak. Our Brush is also certified for use as a safety barrier for a pool fence. Please read on as we answer some of the most common questions Fencing Contractors in South East Melbourne receive about Brush Fencing.

Brush Fencing

Why should I choose a brush fence?

At 65kg per panel, Brush is too heavy to hang from a gate as the weight will cause the gate posts, their foundations and the screws to fail.  For these reasons, we do not recommend or install Brush panel gates.

Why use capping with brush panels?

At 65kg per panel, Brush is too heavy to hang from a gate as the weight will cause the gate posts, their foundations and the screws to fail.  For these reasons, we do not recommend or install Brush panel gates.

What about the quality?

At 65kg per panel, Brush is too heavy to hang from a gate as the weight will cause the gate posts, their foundations and the screws to fail.  For these reasons, we do not recommend or install Brush panel gates.

Brush Fencing

Can I have a brush gate?

At 65kg per panel, Brush is too heavy to hang from a gate as the weight will cause the gate posts, their foundations and the screws to fail.  For these reasons, we do not recommend or install Brush panel gates.

How is it put together?

At 65kg per panel, Brush is too heavy to hang from a gate as the weight will cause the gate posts, their foundations and the screws to fail.  For these reasons, we do not recommend or install Brush panel gates.

We use and recommend Solomit Brush Panels

From the manufacturer:  “Solomit brush fencing will last from 20 to 30 years, and when installed correctly the panels will not rot or crack and are impervious to White Ants. Solomit Brush panels are machine compressed and stitched with galvanised wire, which provides a solid durable panel that helps break up unwanted traffic noise.

Our manufacturing method produces a greater panel density and is far cheaper than the hand packed brush fence

IMPROVE your gardens appearance, use the panels as a windbreak around your pool, barbeque or tennis court or hide that unsightly garden shed, incinerator or pool filter.

The wire spacing allows for both size panels to be cut horizontally to either 900 or 750 in heights across the face. The panel can be reduced in width to any size required. The panels can be successfully butt joined end to end to give the appearance of one continuous panel. The 1800 x 1800 x 50mm nominal panel weight varies on seasonal conditions but is usually about 65 Kg.

They are also suitable for use as a safety barrier for a pool fence, when installed in accordance with the requirements of 1962.1 2007 Part 1: Safety Barriers for Swimming Pools and certified compliant by a suitable qualified inspector.”

call for Carpentry & Fencing

PHONE

0433501890

ADDRESS

Casuarina Dr Frankston South VIC Australia 3199

Email to carpentry & fencing

E-MAIL

tylercantwell@gmail.com